1.Appliance:
The Moving Parts Probe is used in UL 507 to test for hazards from moving parts.It has two tapers from the one inch ending at the tip. The tip has a 0.125 inch (33.175 mm) radius. The handle end has a threaded hole that accepts a force gauge (dynomomter).The probe is made of stainless steel.

2.Technical paremeters:

 Model one(PA130):

Rigid Finger length	101.6mm(4 inch)
Rigid Finger diameter	φ12.7mm(1/2 inch)
Head length	14.3mm(9/16 inch)
Head Radius	R4.8mm(3/16 inch)
Tail Diameter	19.1mm(3/4 inch)
Reference	UL1278 Fig 8.1(PA130A),UL507 Fig 9.1(PA135A)

 

 Model two(PA140):

 

Rigid Finger length	101.6mm(4 inch)
Rigid finger diameter	φ25.4mm(1 inch)
Head radius	R12.7mm(1/42 inch)
Tail diameter	31.75mm(1_1/4inch)
Reference	UL1278 Fig8.2(PA140A),UL398 Fig 8.2(PA170B)

 

 Model three(PA160):

 

Rigid Finger length	88.9mm(3.5inch)
Head length	25.4mm(1inch)
Head Radius	R3.175mm(1/8inch)
Head former diameter	12.7mm(1/2inch)
Tail Diameter	25.4mm(1 inch)
Reference	UL1278 Fig 8.1(PA130A),UL507 Fig 9.1(PA135A),UL1206

Product details: 

 160PA

130PA

140PA