•  It is mainly used for testing thin-layer insulation material electric strength.
•  Stand part of the test device using the whole structure,made use of 304 plate material processing

2.Features:
To improve the insulation board and creepage dielectric properties,surface brushed polished, bottom bracket the minimum distance from the edge of> 35mm, the altitude of 2000 meters designed to meet the strength test requirements of 12 KV.
3.Technical Parameter
Part parameter                Technical index
 Metal pole diameter        5±0.1mm
Metal club weight            100±2g
Max measure rang           20mm
Max strength                   <12KV( altitude below 2000m)
Creepage distances          >35mm
Standard                          IEC60065,GB8898,UL1310

Part parameter	Technical index
Metal pole diameter	5±0.1mm
Metal club weight	100±2g
Max measure rang	20mm
Max strength	<12KV( altitude below 2000m)
Creepage distances	>35mm
Standard	IEC60065,GB8898,UL1310

Part parameter	Technical index
Metal pole diameter	5±0.1mm
Metal club weight	100±2g
Max measure rang	20mm
Max strength	<12KV( altitude below 2000m)
Creepage distances	>35mm
Standard	IEC60065,GB8898,UL1310