Detailed Product Description
1.IEC60695,IEC60884,IEC60335,IEC60598,IEC60950;
2.steel ball pressure test apparatus

1.Description:
The Ball Pressure Apparatus is used to check the integrity of dielectric materials by exerting 20N force. The BPA10 is called out in IEC 60335, 60950, 61010, UL, CSA and European Norms. It is used to check the integrity of dielectric materials by exerting 20N force. The Ball Pressure Apparatus is made of stainless steel for long life. Since accelerated life procedures are used for this oven test, more than one apparatus may be useful for parallel testing.

2.Reference standards:
IEC60695-10-2(2003),IEC60884-1,IEC60320-1,IEC60335-1,IEC60598-1,IEC60950-1,GB2099.1,GB5169.21,GB4706.1.and other similar standards.

3.Basic introduction:
Ball Pressure Apparatus/Tester is the requirement ball (R2.5mm) and total test force 20N ± 0.2N ball pressure testing device,pressure level of the state and was placed in the heating chamber on the surface of the test.
In the test temperature specified by the after 60min +2 min/0min,the test quickly (<10s) immersed in 20 °C ± 5 °C water cooling 6min ± 2min,3min removed from the water surface within the indentation diameter measurement test, as the indentation is more than 2mm in diameter to evaluate the test specified in the heat deformation temperature.

4.Technical parameters
(1).Ball diameter: 5mm (R2.5mm).
(2).Total test pressure: 20N+/-0.2N
(3).Samples bearining: diameter50mm, length100mm Solid stainless steel cylinder
(4.)Production of materials:all used Stainless steel materials
(5)Reference IEC60695-10-2:2003; GB4706.1-2005,
GB2099.1-2008,GB/T5159.21-2006.
(6)Remark: Ball Pressure Instrument takes another a hot box (oven) supporting the use.