Product overview:

The spring impactor is made according to the standards of IEC60068-2-75 and IEC60884-2-2. It is used to test the impact resistance of all surfaces that may be touched by appliance sockets, and evaluate the safety performance and strength level of products.

Test principle:

The spring impactor mainly generates standard energy by the standard mass of each component and the movement of the hammer spring. When the operating handle is pulled, the release claw falls on the release point of the impact element, the hammer spring is pressed, and when the compression amount is different, the spring will release different energy. The different energy can be selected by rotating the cover on the multi-energy spring hammer test apparatus.

Structure:

The spring impactor consists of three parts.

A, the shell. It includes a housing, an impact element guide and a release mechanism, and components that are fixed to these components.

B. Impact element. Includes hammerhead, hammer and serve handle.

C. The Releasing cone.

Equipment packaging size: about: 450 × 120 × 120 (mm) W × D × H, weight: 3kg.

Technical parameters: